Suncast GS1250B Vertical Tool Shed, 20-cubic ft

December 2, 2013 - Comment

A perfect storage solution for your backyard, this durable Vertical Garden Shed is an excellent way to keep all your gardening tools and garage equipment covered, safe, and secure. 20 Cubic foot capacity. Long lasting stay-dry design, resin construction. Internal Size: 5’8″H x 2’3″W x 1’7″D. Built-in support for wood shelf – hooks and shelves

Be Sociable, Share!
Buy Now! $349.98Amazon.com Price
(as of September 24, 2017 7:45 am UTC - Details)

A perfect storage solution for your backyard, this durable Vertical Garden Shed is an excellent way to keep all your gardening tools and garage equipment covered, safe, and secure. 20 Cubic foot capacity. Long lasting stay-dry design, resin construction. Internal Size: 5’8″H x 2’3″W x 1’7″D. Built-in support for wood shelf – hooks and shelves not included. Hot items such as recently used grills, blowtorches, etc. must not be stored in the shed. Heavy articles should not be leaned against the walls, as this may cause distortion and permanent damage. Keep roof clean of snow and leaves. Not intended for storage of flammable or caustic chemicals. Store heavy items near the bottom of shed. Not intended for use by children. Do not stand, sit, or store items on storage shed roof. Handle carefully in extreme temperatures. Assembly level/degree of difficulty: Easy. Made in AmericaKeep garden tools and pool supplies out from under foot with this 20-cubic-foot vertical shed from Suncast. Both tidy and accommodating, the shed features a floor ramp, a foot lock, and built-in supports for adding a wood shelf. A padlock hasp at the handles lets you double lock the shed. Suncast’s construction combines durable resin with a stay-dry design, while the dimensions are perfect for both toys and tools. The simple, snap-together assembly takes less than half an hour. –Emily Bedard

Product Features

  • Crafted from durable, weather-resistant resin
  • Lockable doors with foot latch and padlock hasp to to secure belongings
  • Easy, tool-free assembly
  • Assembled size: 31 by 23 by 72 inches (width by depth by height)
  • Capacity: 27 by 19 by 68 inches (width by depth by height)
Be Sociable, Share!

Comments

Wood Creation's "LG" says:

Needs at least 1 or 2 shelves included This is a solid body storage building exactly as advertised. My goal was to store a mower, trimmer, blower, gas and miscellaneous items. I had to build a shelf (not included) notch it to fit and install it before putting roof in place. It works great for gas and miscellaneous items leaving room for taller items but they must be tilted some. If you have a mower with retractable handles (which I do not) it will fit in this building. (So mower is still out) Other than that it has cleared up the mess in the back and locks the flammables up too.Be careful to read instructions because it would be very difficult to take pieces apart after clicked into place.If you are planning to store a mower I would recomend a larger unit just for ease of use. This one is great for a lot of gardening supplies but I think they should provide at least 2 or more shelves.

Kristin Zhivago "Author, Roadmap to Revenue: ... says:

Just right for outdoor storage, a little small, needs small tool solution Relatively easy to assemble. Definitely keeping the weather out. Great for storing long-handled tools, not so great for smaller tools. Needs a wire basket or some other way of storing smaller tools such as clippers and trowels, away from the bottom. I’m hoping to solve that problem, and when I do, I will consider this purchase a success. It’s not as attractive as a wood shed, but for the money, and if you don’t have much space, this is a good solution.Update, Sept 2009 – we bought one of those “shower accessories” – several wire trays on a pole – modified it just slightly (I think we had to shorten it to fit) and installed it in the back left corner of the shed. That’s where we keep our small tools, and it works well.There are two other problems with this shed. One, if the wind is really strong (we live on a bay), it can blow over. We used a piece of wood to attach it to the side of the house, and that solved the problem. Two, it’s a favorite place for wasps…

Camera Shy says:

Warped Pieces but not a Deal-Breaker As other reviewers have mentioned, the quality control regarding the warped pieces and moving pieces (i.e., doors) interfering with one another is an issue; however not a deal-breaker. The unit goes together rather easily and the design is quite good. It took me alone no more than 30 minutes to assemble and 15 of those minutes was because of a ghost-hunt for piece “M” which the instructions included as a required step. Then I realized piece “M” had already been installed by the factory.If not for the poor instructions, the unit could not be easier to assemble. Hint: If you’ve assembled one, the second one would literally take 5 minutes. The point is to not over-think how the unit is assembled. As for snapping the sides into place, I found laying the unit on its side and sitting on the connection points (with the motion of trying to pop a balloon by sitting on it) worked.I will need to trim away the door tops with a razor knife since they interfere with…

Write a comment

*

Wordpress SEO Plugin by SEOPressor